Kinetic Headset Bearing Set Canyon/Acros AI-70
From Kinetic:
NOTE: This does not fit Canyon SLX Models 2016 onwards
Refer to the Canyon web site for technical data for your year of bike if you are in any doubt if this is the correct Headset for your Canyon.
Important to note: This is a Bearing 'set' which consists of an upper and lower headset bearing & compression ring
Lower Bearing
Inner x Outer x Depth (mm): 37 x 48 x 7
Inch Dia: 1-1/4”
Angle / Chamfer (Deg): One chamfer 45 Deg only on the inner side
Seal: Double-sealed 2RS
Material: Chrome Steel (Race & Balls)
Upper Bearing
Inner x Outer x Depth (mm): 35 x 44 x 5
Inch Dia: 1-1/4”
Angle / Chamfer (Deg): No Chamfers
Seal: Double-sealed 2RS
Material: Chrome Steel (Race & Balls)
Used On: Canyon Bikes that run the AI-70 Headset.
Installation: The lower bearing must be handled with great care - it is internally angular contact which relies on the inner and outer races to have the play dialed out. To achieve this the races are pressed together and can easily separate when removing fork (which can result in the ball bearings falling out). There is no alternative design/construction option for this bearing. We cannot be held liable if mishandling or bad installation results in races separating.
From Kinetic:
NOTE: This does not fit Canyon SLX Models 2016 onwards
Refer to the Canyon web site for technical data for your year of bike if you are in any doubt if this is the correct Headset for your Canyon.
Important to note: This is a Bearing 'set' which consists of an upper and lower headset bearing & compression ring
Lower Bearing
Inner x Outer x Depth (mm): 37 x 48 x 7
Inch Dia: 1-1/4”
Angle / Chamfer (Deg): One chamfer 45 Deg only on the inner side
Seal: Double-sealed 2RS
Material: Chrome Steel (Race & Balls)
Upper Bearing
Inner x Outer x Depth (mm): 35 x 44 x 5
Inch Dia: 1-1/4”
Angle / Chamfer (Deg): No Chamfers
Seal: Double-sealed 2RS
Material: Chrome Steel (Race & Balls)
Used On: Canyon Bikes that run the AI-70 Headset.
Installation: The lower bearing must be handled with great care - it is internally angular contact which relies on the inner and outer races to have the play dialed out. To achieve this the races are pressed together and can easily separate when removing fork (which can result in the ball bearings falling out). There is no alternative design/construction option for this bearing. We cannot be held liable if mishandling or bad installation results in races separating.
From Kinetic:
NOTE: This does not fit Canyon SLX Models 2016 onwards
Refer to the Canyon web site for technical data for your year of bike if you are in any doubt if this is the correct Headset for your Canyon.
Important to note: This is a Bearing 'set' which consists of an upper and lower headset bearing & compression ring
Lower Bearing
Inner x Outer x Depth (mm): 37 x 48 x 7
Inch Dia: 1-1/4”
Angle / Chamfer (Deg): One chamfer 45 Deg only on the inner side
Seal: Double-sealed 2RS
Material: Chrome Steel (Race & Balls)
Upper Bearing
Inner x Outer x Depth (mm): 35 x 44 x 5
Inch Dia: 1-1/4”
Angle / Chamfer (Deg): No Chamfers
Seal: Double-sealed 2RS
Material: Chrome Steel (Race & Balls)
Used On: Canyon Bikes that run the AI-70 Headset.
Installation: The lower bearing must be handled with great care - it is internally angular contact which relies on the inner and outer races to have the play dialed out. To achieve this the races are pressed together and can easily separate when removing fork (which can result in the ball bearings falling out). There is no alternative design/construction option for this bearing. We cannot be held liable if mishandling or bad installation results in races separating.